Ford Shelby GT500KR Exhaust System Kit

• Ships Ground, Two-Day, or Next-Day
• This Product is eligible for International Shipping

• Borla

• Exhaust Kit

• Most jobs typically require 1 of this item.

Borla Performance Industries is proud to announce the release of a great new Cat-Back system for the exciting new 2004-06 Chrysler Crossfire. This system is designed and tuned for the 3. 2L V6 engine with automatic or manual transmission. The 140083 Borla system installs to the factory flange located just after the catalytic converter and is made from full aircraft quality high quality austenitic mandrel bent stainless steel. This system consists of a 2-1/2 in. single inlet pipe leading to a 10 in. long, 9 in. wide oval front muffler. Exiting this muffler is an intermediate 2-1/2 in. pipe connecting to a 14 in. long, 10 in. wide oval rear muffler and exiting with a dual 4 in. Borla embossed single round, rolled edge, angle cut tip at each rear side. This bold new system both dresses up and improves flow and performance on the Crossfire. Borla, the original pioneers of high quality, austenitic stainless steel free flow exhaust utilizes its patented award and race winning technology to deliver quality, sound, performance gains and enhanced fuel economy all with an easy bolt-on installation. All BORLA street products carry the famous BORLA written million-mile warranty.

• Ships Ground, Two-Day, or Next-Day
• This Product is eligible for International Shipping

• Borla

• Exhaust Kit

• Most jobs typically require 1 of this item.

• 14872 - Installation Instructions (PDF)

Borla Performance Industries is proud to announce the release of a great new Cat-Back system for the exciting new 2004-06 Chrysler Crossfire. This system is designed and tuned for the 3. 2L V6 engine with automatic or manual transmission. The 140083 Borla system installs to the factory flange located just after the catalytic converter and is made from full aircraft quality high quality austenitic mandrel bent stainless steel. This system consists of a 2-1/2 in. single inlet pipe leading to a 10 in. long, 9 in. wide oval front muffler. Exiting this muffler is an intermediate 2-1/2 in. pipe connecting to a 14 in. long, 10 in. wide oval rear muffler and exiting with a dual 4 in. Borla embossed single round, rolled edge, angle cut tip at each rear side. This bold new system both dresses up and improves flow and performance on the Crossfire. Borla, the original pioneers of high quality, austenitic stainless steel free flow exhaust utilizes its patented award and race winning technology to deliver quality, sound, performance gains and enhanced fuel economy all with an easy bolt-on installation. All BORLA street products carry the famous BORLA written million-mile warranty.

• Notice: This product is an Oversize Item
• Ships Ground by Truck Only (Freight Item), due to it being an oversize item. Since the item is too big for traditional carriers like UPS and Fedex to ship, a freight company will deliver this part in a truck or tractor trailer to your location. This usually means signifcanly higher shipping costs and the part can only go by ground transportation (expedited shipping options are not possible).
• This Product is eligible for International Shipping

• Borla

• Exhaust Kit

• Most jobs typically require 1 of this item.

• 14925 - Installation Instructions (PDF)

Borla Performance Industries is proud to announce the release of a great new Cat-Back system for the exciting new 2004-06 Chrysler Crossfire. This system is designed and tuned for the 3. 2L V6 engine with automatic or manual transmission. The 140083 Borla system installs to the factory flange located just after the catalytic converter and is made from full aircraft quality high quality austenitic mandrel bent stainless steel. This system consists of a 2-1/2 in. single inlet pipe leading to a 10 in. long, 9 in. wide oval front muffler. Exiting this muffler is an intermediate 2-1/2 in. pipe connecting to a 14 in. long, 10 in. wide oval rear muffler and exiting with a dual 4 in. Borla embossed single round, rolled edge, angle cut tip at each rear side. This bold new system both dresses up and improves flow and performance on the Crossfire. Borla, the original pioneers of high quality, austenitic stainless steel free flow exhaust utilizes its patented award and race winning technology to deliver quality, sound, performance gains and enhanced fuel economy all with an easy bolt-on installation. All BORLA street products carry the famous BORLA written million-mile warranty.

• Notice: This product is an Oversize Item
• Ships Ground by Truck Only (Freight Item), due to it being an oversize item. Since the item is too big for traditional carriers like UPS and Fedex to ship, a freight company will deliver this part in a truck or tractor trailer to your location. This usually means signifcanly higher shipping costs and the part can only go by ground transportation (expedited shipping options are not possible).
• This Product is eligible for International Shipping

• Borla

• Exhaust Kit

• Most jobs typically require 1 of this item.

• 140050 - Installation Instructions (PDF)

Borla Performance Industries is proud to announce the release of a great new Cat-Back system for the exciting new 2004-06 Chrysler Crossfire. This system is designed and tuned for the 3. 2L V6 engine with automatic or manual transmission. The 140083 Borla system installs to the factory flange located just after the catalytic converter and is made from full aircraft quality high quality austenitic mandrel bent stainless steel. This system consists of a 2-1/2 in. single inlet pipe leading to a 10 in. long, 9 in. wide oval front muffler. Exiting this muffler is an intermediate 2-1/2 in. pipe connecting to a 14 in. long, 10 in. wide oval rear muffler and exiting with a dual 4 in. Borla embossed single round, rolled edge, angle cut tip at each rear side. This bold new system both dresses up and improves flow and performance on the Crossfire. Borla, the original pioneers of high quality, austenitic stainless steel free flow exhaust utilizes its patented award and race winning technology to deliver quality, sound, performance gains and enhanced fuel economy all with an easy bolt-on installation. All BORLA street products carry the famous BORLA written million-mile warranty.

• Notice: This product is an Oversize Item
• Ships Ground by Truck Only (Freight Item), due to it being an oversize item. Since the item is too big for traditional carriers like UPS and Fedex to ship, a freight company will deliver this part in a truck or tractor trailer to your location. This usually means signifcanly higher shipping costs and the part can only go by ground transportation (expedited shipping options are not possible).
• This Product is eligible for International Shipping

• Borla

• Exhaust Kit

• Most jobs typically require 1 of this item.

Borla Performance Industries is proud to announce the release of a great new Cat-Back system for the exciting new 2004-06 Chrysler Crossfire. This system is designed and tuned for the 3. 2L V6 engine with automatic or manual transmission. The 140083 Borla system installs to the factory flange located just after the catalytic converter and is made from full aircraft quality high quality austenitic mandrel bent stainless steel. This system consists of a 2-1/2 in. single inlet pipe leading to a 10 in. long, 9 in. wide oval front muffler. Exiting this muffler is an intermediate 2-1/2 in. pipe connecting to a 14 in. long, 10 in. wide oval rear muffler and exiting with a dual 4 in. Borla embossed single round, rolled edge, angle cut tip at each rear side. This bold new system both dresses up and improves flow and performance on the Crossfire. Borla, the original pioneers of high quality, austenitic stainless steel free flow exhaust utilizes its patented award and race winning technology to deliver quality, sound, performance gains and enhanced fuel economy all with an easy bolt-on installation. All BORLA street products carry the famous BORLA written million-mile warranty.

• Notice: This product is an Oversize Item
• Ships Ground by Truck Only (Freight Item), due to it being an oversize item. Since the item is too big for traditional carriers like UPS and Fedex to ship, a freight company will deliver this part in a truck or tractor trailer to your location. This usually means signifcanly higher shipping costs and the part can only go by ground transportation (expedited shipping options are not possible).
• This Product is eligible for International Shipping

• Borla

• Exhaust Kit

• Most jobs typically require 1 of this item.

Borla S-Type Exhaust System is precision manufactured using aircraft quality T-304 stainless steel; this system is designed to endure years of heavy use. Installing a Borla Performance Exhaust System on your vehicle will eliminate the restrictive design of the stock exhaust, allowing your engine to discharge exhaust gas easier. The result is more horsepower and torque, longer engine life, and a distinctive throaty growl- all this, with easy bolt-on installation. These installation instructions have been written to help you in the installation of your Borla Performance Exhaust System.

• Notice: This product is an Oversize Item
• Ships Ground by Truck Only (Freight Item), due to it being an oversize item. Since the item is too big for traditional carriers like UPS and Fedex to ship, a freight company will deliver this part in a truck or tractor trailer to your location. This usually means signifcanly higher shipping costs and the part can only go by ground transportation (expedited shipping options are not possible).
• This Product is eligible for International Shipping

• Borla

• Exhaust Kit

• Most jobs typically require 1 of this item.

• 140067 - Installation Instructions (PDF)

Borla Performance Industries is proud to announce the release of a great new Cat-Back system for the exciting new 2004-06 Chrysler Crossfire. This system is designed and tuned for the 3. 2L V6 engine with automatic or manual transmission. The 140083 Borla system installs to the factory flange located just after the catalytic converter and is made from full aircraft quality high quality austenitic mandrel bent stainless steel. This system consists of a 2-1/2 in. single inlet pipe leading to a 10 in. long, 9 in. wide oval front muffler. Exiting this muffler is an intermediate 2-1/2 in. pipe connecting to a 14 in. long, 10 in. wide oval rear muffler and exiting with a dual 4 in. Borla embossed single round, rolled edge, angle cut tip at each rear side. This bold new system both dresses up and improves flow and performance on the Crossfire. Borla, the original pioneers of high quality, austenitic stainless steel free flow exhaust utilizes its patented award and race winning technology to deliver quality, sound, performance gains and enhanced fuel economy all with an easy bolt-on installation. All BORLA street products carry the famous BORLA written million-mile warranty.

• Notice: This product is an Oversize Item
• Ships Ground by Truck Only (Freight Item), due to it being an oversize item. Since the item is too big for traditional carriers like UPS and Fedex to ship, a freight company will deliver this part in a truck or tractor trailer to your location. This usually means signifcanly higher shipping costs and the part can only go by ground transportation (expedited shipping options are not possible).
• This Product is eligible for International Shipping

• Borla

• Exhaust Kit

• Most jobs typically require 1 of this item.

• 14834 - Installation Instructions (PDF)

Borla Performance Industries is proud to announce the release of a great new Cat-Back system for the exciting new 2004-06 Chrysler Crossfire. This system is designed and tuned for the 3. 2L V6 engine with automatic or manual transmission. The 140083 Borla system installs to the factory flange located just after the catalytic converter and is made from full aircraft quality high quality austenitic mandrel bent stainless steel. This system consists of a 2-1/2 in. single inlet pipe leading to a 10 in. long, 9 in. wide oval front muffler. Exiting this muffler is an intermediate 2-1/2 in. pipe connecting to a 14 in. long, 10 in. wide oval rear muffler and exiting with a dual 4 in. Borla embossed single round, rolled edge, angle cut tip at each rear side. This bold new system both dresses up and improves flow and performance on the Crossfire. Borla, the original pioneers of high quality, austenitic stainless steel free flow exhaust utilizes its patented award and race winning technology to deliver quality, sound, performance gains and enhanced fuel economy all with an easy bolt-on installation. All BORLA street products carry the famous BORLA written million-mile warranty.

• Notice: This product is an Oversize Item
• Ships Ground by Truck Only (Freight Item), due to it being an oversize item. Since the item is too big for traditional carriers like UPS and Fedex to ship, a freight company will deliver this part in a truck or tractor trailer to your location. This usually means signifcanly higher shipping costs and the part can only go by ground transportation (expedited shipping options are not possible).
• This Product is eligible for International Shipping

• Borla

• Exhaust Kit

• Most jobs typically require 1 of this item.

Borla Performance Industries is proud to announce the release of a great new Cat-Back system for the exciting new 2004-06 Chrysler Crossfire. This system is designed and tuned for the 3. 2L V6 engine with automatic or manual transmission. The 140083 Borla system installs to the factory flange located just after the catalytic converter and is made from full aircraft quality high quality austenitic mandrel bent stainless steel. This system consists of a 2-1/2 in. single inlet pipe leading to a 10 in. long, 9 in. wide oval front muffler. Exiting this muffler is an intermediate 2-1/2 in. pipe connecting to a 14 in. long, 10 in. wide oval rear muffler and exiting with a dual 4 in. Borla embossed single round, rolled edge, angle cut tip at each rear side. This bold new system both dresses up and improves flow and performance on the Crossfire. Borla, the original pioneers of high quality, austenitic stainless steel free flow exhaust utilizes its patented award and race winning technology to deliver quality, sound, performance gains and enhanced fuel economy all with an easy bolt-on installation. All BORLA street products carry the famous BORLA written million-mile warranty.

• Notice: This product is an Oversize Item
• Ships Ground by Truck Only (Freight Item), due to it being an oversize item. Since the item is too big for traditional carriers like UPS and Fedex to ship, a freight company will deliver this part in a truck or tractor trailer to your location. This usually means signifcanly higher shipping costs and the part can only go by ground transportation (expedited shipping options are not possible).
• This Product is eligible for International Shipping

• Borla

• Exhaust Kit

• Most jobs typically require 1 of this item.